PRESSES FOR FORGING AND HOT MOULDING.


Hydroforming press 1500 / 800 tons

presses for forging

Hydroforming press 1500 / 800 tons

Hydroforming press 1500 tons
Front protection PHOTOELECTRIC BARRIERS
Rear protection CLOSED IN WORK ISLAND
Right side protection CLOSED IN WORK ISLAND
Left side protection CLOSED IN WORK ISLAND
Lower floor - machining / slots for T nuts on customer request
Movable table - machining / slots for T nuts at the customer's request
Installed power 65 KW
Thrust force of the main cylinder 1500 Tons
Operator side horizontal light 2000 mm
Side horizontal light 1070 mm
Vertical light 1300 mm
Main cylinder stroke 700 mm
Height of the worktop from the ground 1050 mm
Lower worktop size 2000x1000 mm
Mobile worktop size 2000x1000 mm
Fast descent speed 200 mm / sec
Working speed 5-12 mm / sec
Fast ascent speed 200 mm / sec

Hydroforming press 800 tons.
Front protection PHOTOELECTRIC BARRIERS
Rear protection CLOSED IN WORK ISLAND
Right side protection CLOSED IN WORK ISLAND
Left side protection CLOSED IN WORK ISLAND
Lower floor - machining / slots for T nuts on customer request
Movable table - machining / slots for T nuts at the customer's request
Installed power 60 KW
Thrust force of main cylinder 800 Tons
Operator side horizontal light 1335 mm
Side horizontal light 980 mm
Vertical light 1300 mm
Main cylinder stroke 800 mm
Height of the worktop from the ground 1000 mm
Dimension of the lower worktop 1300x1000 mm
Dimension of the mobile worktop 1300x1000 mm
Fast descent speed 200 mm / sec
Working speed 5-12 mm / sec
Fast ascent speed 200 mm / sec

  • Code: 21x30/31
  • Producer: AEM3 s.r.l.
  • Category: forging presses

Press for molding 1000 tons.

presses for forging

Press for molding 1000 tons

Lower floor - machining / slots for T nuts on customer request
Movable table - machining / slots for T nuts at the customer's request
Installed power 34 KW
Thrust force of main cylinder 1000 Tons
Operator side horizontal light 1500 mm
Vertical light 1000 mm
Main cylinder stroke 400 mm
Height of the worktop from the ground 800 mm
Dimension of the lower worktop 1500x1440 mm
Dimension of the mobile worktop 1430x1480 mm
Rapid descent speed 25 mm / sec
Working speed 5 mm / sec
Rapid rise speed 25 mm / sec

  • Code: 21x15
  • Producer: AEM3 s.r.l.
  • Category: hydraulic presses

PRESSES FOR FORGING.

presses for forging

PRESSES FOR FORGING

PRESS "4 COLUMNS" - POWER 2000 ton. - LIGHT 2000x2000x1800 mm. - STROKE CYLINDER 1100 mm. - VEL. 200/50 / 10-5 / 200 mm / sec - ELECTRONIC SPEED 'WORKING -COMPLETE OF N ° 08 PULLERS HIGHER AND LOWER TO 20 ton. STROKE 100 mm. - SYSTEM WITH SELF-LEARNING - SAVING RECIPES AND ACCESSORIES - CONTROL PUSH-BUTTON BIMANUAL - LEVEL OF PROTECTION BARRIERS IV ON OPERATOR SIDE AND REAR OPERATOR WITH PROTECTION IN FIXED NETWORK ON THE OTHER SIDE PRESS - PRESS WITH PILLOW BLANK HOLDER SUPERIOR.

  • Code: 28023
  • Producer: AEM3 s.r.l.
  • Category: hydraulic presses

SYSTEM FORMING PIPES AND CURVE HOT.

forming pipes and curve hot

SYSTEM FORMING PIPES AND CURVE HOT

POWER 1500 ton. - LIGHT COLUMNS OPERATOR SIDE 2500 mm. - LIGHT SIDE SIDE COLUMNS 600 mm. - COLUMN DIAMETER 400 mm. - LIGHT BETWEEN PLANS OPEN 2600 mm. - PISTON STROKE 1800 mm. SPEED 'UP DOWN 100 mm / sec - SPEED' WORKING 15 mm / sec - TOTAL POWER ENGINES 200KW - PRESS COMPLETE WITH BLANK HOLDER 250 ton. - STROKE PISTON BLANK HOLDER 2300 mm. - PRESS COMPLETE PLAN TO BOLSTER 830X1350X110 mm. - SYSTEM WITH SELF-LEARNING WITH SAVING RECIPES AND OTHER ACCESSORIES - CONTROL PUSH-BUTTON BIMANUAL - PROTECTIVE BARRIERS OF LEVEL IV ON LATOOPERATORE AND REAR - PROTECTION FIXED NETWORK ON THE OTHER SIDE PRESS.

  • Code: 25054
  • Producer: AEM3 s.r.l.
  • Category: hydraulic presses

PRESS FOR FORGING.

presse per forging

PRESS FOR FORGING

Press "LASKO" completely overhauled: Press that rises from the bottom up - Gap between the shoulders operator side 2100 mm. - Light between open plans 5000 mm. - Piston stroke 3000 mm. - Rising / lowering speed 500 mm / sec - Working speed 60 mm / sec - Total power of the motors installed around 800 kW (N ° 03x250 kW + N ° 01x50 kW) - tank capacity 8.000 lt. - Overall dimensions of the press about 3,000 x 1,100 x 12,000 mm. (Width. X depth x height.) - Dimensions of the tank about 5,000 x 2,500 x 2,800 mm. (Width. X D x H).

  • Code: 12020
  • Producer: AEM3 s.r.l.
  • Category: hydraulic presses

PRESS FOR FORGING.

forging presses

PRESS FOR FORGING

Power 800 Ton - Light between the shoulders facing press 1300 mm. - Side Light 900 mm. - Vertical size between the open tops 800 mm. - Cylinder stroke 600 mm.

  • Code: 15002
  • Producer: AEM3 s.r.l.
  • Category: hydraulic presses

REGENERATION PRESS.

regeneration presses

REGENERATION PRESS

Main features: PUSH 1500 tons - NUMBER PISTON 1 - MAXIMUM OPERATING PRESSURE 245 BAR - DIMENSIONS FLOOR X-Y 1.100X1.235 mm. - POKER SIZE X-Y 1.200x1.360 mm. - Guide Number 4 - STROKE 700 mm. - LIGHT AT TOP DEAD 1.400 mm. - LIGHT THE DEAD LOWER 700 mm. - WINDOW DIMENSIONS 410x700 mm. - SPEED 'MAXIMUM CLOSING QUICK TABLE TOP MOBILE 300 mm / sec - SPEED' PRESSING ADJUSTABLE 18.6 / 6.23 mm / sec - SPEED 'MAXIMUM OPENING QUICK TABLE TOP MOBILE 300 mm / sec - NUMBER 3 ENGINES - POWER oF ELECTRIC MOTORS INSTALLED No. 2 55kW + n ° 1 9Kw - WEIGHT 46.000 Kg. - WIDTH 3.200 mm. - DEPTH 3.000 mm. - HEIGHT 6.500 mm. - HEIGHT OF GROUND 1.000 mm.

  • Code: MURARO
  • Producer: MURARO
  • Category: hydraulic presses
pressa per forgiatura e formatura

A.E.M.3 s.r.l.

Designing and building hydraulic presses - Presses tailor

Company Profile

AEM3 is an important company in the national and international scene for the construction of hydraulic presses CE certified for each specific need. Thanks to the professionalism derived from a long experience of 40 years AEM3 is able to solve every need and requirement of customers, starting with a feasibility study, followed by elaboration of the project, using a selection of the best components available on the market and adopting the utmost care in workmanship and assembly. AEM3 has developed for its presses a PC system for the control and management of the working cycles, also interfaced with robotic loading and unloading. Specialized in manufacturing of HYDRAULIC PRESSES DIMENSIONS HIGH.

AEM3 executes each project and process calculations with the help of special innovative programs are constantly updated. SIZING CALCULATION FEM.

AEM3 implemented with all its resources, solutions of high technological innovation, offering its customers a product that provides additional energy savings.

AEM3 realizes all the parts of the production within its structure, optimizing the time of delivery, all this, thanks to the large and complete range of equipment available and the professionalism of the workers employed.

Warehouse Complete ACCESSORIES PRESSES.

... because CHOOSE AEM3

A.E.M.3 is totally MADE IN ITALY.

A.E.M.3 has 40 years of experience in the field of hydraulic presses.

A.E.M.3 production has a completely internal. We customize the machines to suit your needs and we have delivery times altogether inimitable.

A.E.M.3 using the best plant hydraulic and electric available on the market.

A.E.M.3 provides its customers with a fast and professional service.

for A.E.M.3 the most difficult tasks are a stimulus to improve and propose innovative ideas.

... what has allowed us to conquer prestigious destinations have always been rooted in our entrepreneurial skills, commitment and professionalism of highly qualified personnel.

AEM3 - hydraulic presses
  • Address: via Vezze, 60 - 24050 - Calcinate (Bg) - Italia
  • Email: info@aem3.it
  • Tel: +39.035.4423562
  • Fax: +39.035.4423589